RacerMAME is a command line M.A.M.E. derivate work designed to best fit your Arcade Racing Cabinet needs. RacerMAME is based on MAME 0.106 sources.
Features:
- Specifically modified inputs for all Arcade shifters (Hi/Lo, Lo/Hi, sequential) compatibility
- Pre-set steering parameters in accordance to the manual or genuine Arcade machines (when possible)
- New options:
"joy_saturation": advanced control over steering angle saturation
"geartype": set this accordingly to your shifter (2 ways, 2 ways reversed or sequential)
"steertype": automatic set of DIP switches on games supporting both the hardwares (opti and pot)
- No warnings, game info and disclaimers on startup (exept some first-run input hints)
- Easier inputs (TAB) configuration
- Default options pre-set for best Arcade emulation and speed
- Updated drivers (when possible)
RacerMAME μια εκδοχη του mame προσανατολισμενη στα racers και επικεντρωμενη στην βελτιστοποιηση της εξομοιωσης της συγκεκριμμενου ειδους arcades ...
Γιατι ενα ακομα build???
Α:Yes, its a modification of MAME 0.106 i coded for my 2-gears, single microswitch, upright racing cabinet (there where no MAME ports really good for it, so i decided to work on my own port ). The cab is a generic jamma cabinet with potentiometer steering wheel interfaced to the PC via joyhack and JammASD. The port works really good on it. I have not tested the software on a cab with optical steering wheel, but there should not be problems too.
Γιατι MAME 0.106 ????
A: RacerMAME is based on MAME 0.106 because of the reduced speed of emulation in "successive" MAME versions. In addition, RacerMAME is not intended to support all racing games the official MAME includes, but only a few hits.
Οταν λεμε RacerMAME ενοουμε ΟΛΑ τα racing games(θα προστεθουν μελλοντικα και αλλα Racers δηλαδη ΄ , ήήήήήήήή ........
A: RacerMAME actually runs more than my favourites racing games but, who knows
Q: Force Feedback (FFB) or shaking effect (Outrun) or whatever output handling θα εχουμε εστω ή εισαι εντελως αμετανοητος οπαδος του Περιανδρου Ποπωτα ???
A: Well, unfortunately outputs are included from MAME 0.110 IIRC, so in no way you can take advantage from software's like MAMEHooker.
Εντάξει.σε αυτό ομολογώ την πάτησα.Νόμιζα πως ο Nemo πόσταρε κάτι καινούργιο για το racermame,και μόλις βλέπω κάτι για 0.106 έκδοση,λέω ώπα,κάτι δεν πάει καλά εδώ...Το bot πιο κάτω μου ''έλυσε'' τις απορίες μου
Long live the emulator!!!!
[url=http://ubanimator.com][img]http://img288.imageshack.us/img288/2192/userbar517432aj.gif[/img][/url]
grip έγραψε:Εντάξει.σε αυτό ομολογώ την πάτησα.Νόμιζα πως ο Nemo πόσταρε κάτι καινούργιο για το racermame,και μόλις βλέπω κάτι για 0.106 έκδοση,λέω ώπα,κάτι δεν πάει καλά εδώ...Το bot πιο κάτω μου ''έλυσε'' τις απορίες μου
Grip προκειτα για μια Racer games προσανατολισμενη/στοχευμενη build (βασισμενη σταθερα και απαρεγκλητα σε MAME 0.106 sources) ,αρα καθολου μα καθολου obsolete,απλα
RacerMAME is based on MAME 0.106 because of the reduced speed of emulation in "successive" MAME versions.
,η οποια προσφατα (14/09/2012) εφτασε στην εκδοση 0.8.7c .
Και bot-δωθεισης της ευκαιριας "και για να μην νομιζει πλεον , οτι την πατησε ο Grip ", ας ανανεωσουμε το περιεχομενο του thread.
- Specifically modified inputs for all Arcade shifters (Hi/Lo, Lo/Hi, sequential) compatibility
- Pre-set steering parameters in accordance to the manual or genuine Arcade machines (when possible)
- New options:
"joy_saturation": advanced control over steering angle saturation
"geartype": set this accordingly to your shifter (2 ways, 2 ways reversed or sequential)
"steertype": automatic set of DIP switches on games supporting both the hardwares (opti and pot)
- No warnings, game info and disclaimers on startup (exept some first-run input hints)
- Easier inputs (TAB) configuration
- Default options pre-set for best Arcade emulation and speed
- Updated drivers (when possible)
- No nag screen /white screen patch applied (BYOAC forum patch)
- Hiscore support (MKChamp patch, BYOAC forum)
- Outrun outputs hooked back up (derived from Howad Casto mods for MAME 0.137, BYOAC forum)
- WEC Le Mans start button lamp and vibrator motor, Special Criminal Investigation vibrator motor, hotchase vibrator motor, double axle vibrator motor, chase bombers vibrator motor and various lamps hooked up (derived from bdam mods for MAME 0.142u4, BYOAC forum)
- Virtual key-press made effective (used for H2Seq compatibility)
- New Hi/Lo shifter position icon (CShifter in video TAB menu, see artwork folder)
- Other changes (added PORT_TOGGLE to Konami GT, corrected a typo in powerdrift outputs definitions, made sci and clones actually compatible with 270 degrees steering wheels)
Αν βεβαια ο processorας /cpu σας ειναι Pentium 4 2.66 GHz ή καποια ποιο αργη ,
τοτε καλυτερα να χρησιμοποισετε την τελευταια (D) εκδοση του RacerMAME106 rev 0.8.7d
- No nag screen /white screen patch applied (BYOAC forum patch)
- Hiscore support (MKChamp, BYOAC forum)
- Outrun outputs hooked back up (derived from Howad Casto mods for MAME 0.137, BYOAC forum)
- WEC Le Mans start button lamp and vibrator motor, Special Criminal Investigation vibrator motor, hotchase vibrator motor, double axle vibrator motor, chase bombers vibrator motor and various lamps hooked up (derived from bdam mods for MAME 0.142u4, BYOAC forum)
- Virtual key-press made effective (used for H2Seq compatibility)
- New Hi/Lo shifter position icon (CShifter in video TAB menu, see artwork folder)
- Other changes (added PORT_TOGGLE to Konami GT, fixed a typo in powerdrift outputs definitions, fixed sci and clones compatibility with 270 degrees steering wheels)
????
Official Site
", ας ανανεωσουμε το περιεχομενο του thread.