VICE & WinVICE (C64 Emu) ~ Official Thread

[Maddog]

Για τους fans της Commodore, ενδεχομένως ο καλύτερος emu έβγαλε νέα έκδοση:

* Changes in VICE 1.16
======================

** General
----------

- Improved accuracy of 65xx processor core emulation.

** Drive changes
----------------

- Added support for idle traps to 1551 emulation.

** C64 changes
--------------

- Fixed crash using REU emulation.

- A timing problem has been fixed using old NTSC mode.

- Some stupid char ROM display bug has been fixed.

** C128 changes
---------------

- Fixed crash using REU emulation or CP/M mode.

** PLUS4 changes
----------------

- Added proper TAP support.

** Unix Changes
---------------

- Hardware scaling can be switched at runtime now.

- Fixed crash on machines with weird vidmode configurations.

- Fixed random crash if settings are saved.

** MS-Windows changes
---------------------

- Added support for userport or ACIA serial emulation to connect to
some TCP/IP port.

- It is possible to use the opencbm library from the cbm4win project
to access real devices (drives or printer) connected to the host
machine.

- Improved the keyboard emulation to allow symbolic keyboard mappings
at least for US-style keyboards. Notice: Many symbolic keyboard
mapping definitions are still missing at the moment.

- The joystick fire button can be selected for hardware joysticks.

- It is possible to attach disk/tape images read-only now.

** Miscellaneous changes
------------------------

- Fixed some crash in the file system emulation.

- Improved datasette motor emulation.

[tasoulhs]

Την καινούργια αυτή έκδοση μπορείτε να βρείτε στη σελίδα της ομάδας ανάπτυξης του εξομοιωτή εδώ!
VICE v1.16 (DOS)
WinVICE v1.16 (Windows)
Ελπίζω οι απευθείας σύνδεσμοι με τα αρχεία να μην τους πειράζουν.

Εμένα που δεν ξέρω από αυτά τα Commodore, Atari, Amstrad κλπ. ποιος θα αναλάβει να μου πει τι ήταν;

[Maddog]

Εμένα που δεν ξέρω από αυτά τα Commodore, Atari, Amstrad κλπ. ποιος θα αναλάβει να μου πει τι ήταν;

Do your reading!

Μια αρκετά εκτεταμένη ιστορία της Commodore εδώ ενώ σύντομες πληροφορίες και αρκετά links για πάμπολλα μηχανήματα (μαζί και κάποια που δεν ξέρω ούτε εγώ ) εδώ

[GeoAnas]

Τασούλη την άλλη φορά που θα με επισκευ8είς θα σου έχω πρακτική σε Commodore 64

[tasoulhs]

Γιώργο μόνο πες μου τι χρειάζεται να έχω μαζί για να κατανοήσω πιο εύκολα την ιστορία αυτών των μηχανημάτων.

Ξέρεις τώρα, μπαμπαδάκια, ρεβανί, σαραγλί κλπ.
http://www.seremeta.gr/
http://www.imathia1.gr/special/

[Nemo]

Γιώργο μόνο πες μου τι χρειάζεται να έχω μαζί για να κατανοήσω πιο εύκολα την ιστορία αυτών των μηχανημάτων.

Ξέρεις τώρα, μπαμπαδάκια, ρεβανί, σαραγλί κλπ.

Μηπως ξεχασες κατι ,(ισως το καλυτερο) ????


LOAD" κωκ-ακια του Παγουρα ",8,1

[Maddog]

Syntax error: "Tasoulhs" not compatible with LOAD "κωκ-ακια του Παγουρα",8,1

(μετάφραση: δεν νομίζω ότι είχε ποτέ την ευκαιρία να γράψει τέτοιες commands)

Γιώργη, κάντου μπόλικα ιδιαίτερα, από ότι βλέπω πληρώνει καλά!

[GeoAnas]

Κάντα 10 Κιλά γιατί θα χρειαστούμε κάτι να περνάμε την ώρα μας μέχρι να τελειώσει το φόρτωμα από την κασέτα !
Για την ιστορία Arcadia 64 --> Load time 23 minutes !
Ας είναι καλά τα T64 files που μετέφερα επιτυχώς σε real tape και τα φορτώνω σε real CBM 64.Turbo Tape ROX !
10 60άρες TDK tapes χώρεσαν μπόλικο πράμα ....
και τώρα με συγχωρείτε ,πρέπει να γυρίσω στο Blackwyche....ULTIMATE ROX !.....
Maddog ετοίμασε τις ινσουλίνες καλού ,κακκού...και τι γλέντια θα γίνουν με τον Spectrum 48K.....

[astral_cloud]

Τι παράξενος ο κόσμος των ΜΕΓΑΛΩΝ! (j/k)

[paspartoo]

Πραγματι ... εχουν ξεφυγει αυτα τα παιδια

(Αμα καταφερετε να φορτωσετε και το Zorgon's Revenge σε Oric-1 θα ανεβω Σαλλονικη και θα φερω οτι εχει ο Τερκενλης, για support στο δυσκολο εργο σας ... )

[Scatman]

* Changes in VICE 2.2
======================

** General
----------

- On autostart, do not change true drive emulation (TDE) anymore by
default. The old behaviour can be switched on again by specifiying
-autostart-handle-tde on the command line.
There is one drawback of this behaviour: If TDE is switched on, an
image attached must fit to the drive type set. For example, when you
attach a .D81, you must have the drive type set to 1581, or the
autostart will fail.

- Added automatic Warp mode during autostart. If this resource is enabled then
VICE automatically enables the warp mode and then loads a file. After
loading the warp mode is disabled again and then the program is started.

- Autostarting a PRG file can now be done in three different ways:

* "Virtual FS": This mode mounts the directory where the file resides as a
virtual filesystem on drive #8 and then loads the PRG via virtual drive
traps. This was the only way of autostarting in previous VICE versions
and is still the default.

* "Inject to RAM": The PRG file is loaded from VICE directly into the RAM of
the emulated machine. Then the memory setup of a Basic LOAD is simulated
and the program is run. This is the fastest mode available but may lack
compatibility as no actual load operation was performed in the emulator.
However, no drive setup is altered during the operation.

* "Diskimage": VICE creates a temporary new disk image and copies the
contents of the PRG file onto it. Then this image is mounted in drive #8
and the program is loaded from there. If TDE is enabled then the load
operation is most compatible. The disk image stays attached until a new
image is mounted.

- Improved PAL emulation is now available for Unix/Xaw XVideo mode, and
AmigaOS. Only the YUV packed modes work, the planar modes still use the
old code paths, though.

- Sound core has been reworked to enable lower latency of operation.
Approximately 50 ms latency values are now routinely reached, and some
people have reported that as low as 30 ms still works for them.

- New SDL port. See ReadmeSDL.txt for details.

- New win64 ports, both amd64/x64 and ia64 are supported (msvc compile only).

- New SDL based armle, mipsle, ppcbe and shle QNX 6.x ports.

- New SDL based M68k and sparc SunOS ports.

- New SDL based Syllable port.

- New SDL based Dingoo port.

- Remote monitor (in other words: TCP/IP interface to VICE monitor) added.

- Fixed non-6502/6510 CPU handling in monitor.

** C64/C128 changes
-------------------

- ReSID's resampler has been optimized with MMX assembly. Some long-standing
bugs in resample-interpolate mode were also fixed.

- ReSID-FP has been optimized, too. It clocks the analog parts at half the
rate now, which saves CPU during filter emulation especially for 6581 modes.

- Added SFX Sound Sampler and SFX Sound Expander emulation.

- Added EasyFlash cartridge emulation.

- Added paddle emulation.

- Added lightpen/lightgun emulation, currently only available for the following
ports: SDL, GTK+, cocoa, win32/win64 and msdos.

- Added support for the following userport joystick adapters: CGA/Protovision,
DXS/HIT, PET (normally only used on the PET/CBM2), Hummer (normally only
used on the C64DTV) and OEM (normally only used on the VIC20).

** C128 changes
---------------

- Added RAM banks 2 and 3 support.

- Improved the VDC emulation.

- Stereo SID $D7xx range support.

** VIC20 changes
----------------

- New cycle exact emulation core. Handles accesses to unconnected
address space and in-line graphics data changes correctly.
(fixes "Impossiblator 3" and others)

- Improved VIC emulation (in-line color/reverse mode changes on half-chars).

- Cartridge handling rewritten.

- Added Mega-Cart cartridge emulation.

- Added Final Expansion cartridge emulation.

- Default memory configuration changed from full to unexpanded.

- Added paddle emulation.

- Added lightpen/lightgun emulation, currently only available for the following
ports: SDL, GTK+, cocoa, win32/win64 and msdos.

- Corrected the joystick support, since the VIC20 can only have one joystick
attached on the joystick port.

- Added support for the following userport joystick adapters: CGA/Protovision
(normally only used on the C64/C128), PET (normally only used on the
PET/CBM2), Hummer (normally only used on the C64DTV) and OEM.

** PLUS4 changes
----------------

- Added Digibooster SID Cart add-on emulation.

- Added SID Cart joystick port emulation.

- Fixed bug in tape recording.

- Improved graphics handling.

** C64DTV changes
-----------------

- Replaced old DTVSID emulation with ReSID-DTV.

- Minor bug fixes and emulation improvements.

- Added support for the following userport joystick adapters: CGA/Protovision
(normally only used on the C64/C128), PET (normally only used for the PET),
Hummer and OEM (normally only used on the VIC20).

** PET changes
--------------

- Corrected the joystick support, since the only way a PET can use a joystick
is by a userport joystick adapter, the following userport joystick adapters
are currently supported: CGA/Protovision (normally only used on the
C64/C128), PET, Hummer (normally only used on the C64DTV) and OEM (normally
only used on the VIC20).

** CBM2 changes
---------------

- Corrected the joystick support, since the only way a CBM2 can use a joystick
is by a userport joystick adapter, the following userport joystick adapters
are currently supported: CGA/Protovision (normally only used on the
C64/C128), PET, Hummer (normally only used on the C64DTV) and OEM (normally
only used on the VIC20).

** Unix changes
---------------

- Rudimentary PulseAudio sound driver has been added.

- Added support for dynamic loading of FFMPEG libraries.

- Added support for dynamic loading of OpenCBM and Lame library

** MS-Windows changes
---------------------

- New video driver using DirectX9 if possible. This allows free window scaling
and fullscreen mode covering the whole screen. Using a fixed aspect ratio
is optional.

- New Danish and Turkish translations of the UI elements and command-line options.

- Added support for dynamic loading of FFMPEG libraries.

- Added support for dynamic loading of OpenCBM and Lame library

- New Italian kaymap.

** AmigaOS changes
------------------

- New Danish and Turkish translations of the UI elements and command-line options.

- Added experimental PCI HardSID and Catweasel support.

- Used AROS (x86, ppc, amd64) new lowlevel libraries which should make USB
joysticks and joypads usable.

** Mac OS X changes
-------------------

- Cocoa port now supports all emulators

- Support for Mac OS X versions 10.4, 10.5, and 10.6 and PowerPC, Intel 32,
and 64 Bit Support.

- Cocoa UI redesign. Emulator window is reduced to emulation display only.
Emulator is controlled with the new control window. There disk and tape
images can be attached by clicking on the image or dragging files there.
Added the tape controls for the datasette and the status bar.
Added a master volume slider.

- Added SyncDraw display mode that does temporal filtering of the frames
generated by the machine (motion blur). This enhances the display quality in
moving scenes if the machine frame rate does not match the display refresh
rate (e.g. a 50 Hz C64 is shown on a 60 Hz LCD display)

- Added FLIcker Fixer to SyncDraw mode that does full frame reconstruction,
i.e. two half frames are buffered and displayed as a full frame. This helps
to reduce flicker in FLI modes but might introduce too much blur in other
modes.

- Attach image file dialogs now show the contents of the selected disk/tape
image and allow to pick a program to load from there.

- Emulator is now paused if Mac OS X goes to sleep.

- The CoreAudio sound driver was completely rewritten to support the updated
sound APIs found in the new Mac OS X versions.

- Added movie recording in QuickTime format (PowerPC and 32 Bit Intel only)

- Added support for dynamic loading of FFMPEG libraries installed via MacPorts

- Added support for dynamic loading of OpenCBM and Lame library

- Improved build scripts to support all current Mac OS X versions,
architectures, and compilers (gcc 4.0, gcc 4.2, clang)

- Libnet and libpcap updated to current versions

- Some keymap fixes in cocoa port

http://vice-emu.sourceforge.net/

[Maddog]

- New SDL based Dingoo port.

Ambu_dare, το είδες αυτό;

[Nemo]

General
New SDL based MIPS Windows NT port.
New SDL based native Dingoo port.
New monitor commands: autostart and autoload.
Rewrite of the sound system, output is now mono/stereo selectable.
Split off the 5x0 model from the 6x0/7x0 models in xcbm2, new emulator is called xcbm5x0.
Split off sid player from c64, new program is called vsid.
New maintainer for the polish translations, they are now 100% up2date.
New IEC FD2000/4000 drive support.
New 1541 drive sounds emulation.
1541 drive emulation has been greatly improved.

C64/C128 changes
ACIA address now selectable.
I/O conflict behaviour now selectable.
Added Pagefox cartridge support.
Added Silverrock cartridge support.
Added Formel64 cartridge support.
IDE64 support extended to be able to handle 4 devices.
IDE64 FD/CD/CF support added.
Added "Kingsoft" ("Business Basic" aka "S'more") cartridge support.
SFX sound sampler, SFX sound expander and digimax extended to output in stereo.
Added Triple SID support.
Added Nordic Replay support to the Retro Replay cartridge emulation.
Added video to audio leak sound support.
Added VICII 'no border' mode support.
Magic Voice cartridge emulation improvements.
Added support for the kingsoft and starbyte userport joystick adapters.
Added MicroMys, SmartMouse, Atari CX-22 trackball, and Atari mouse support.
Added supercard+ support.
Added DS12C887 RTC expansion support.
Added userport RTC (58321a) expansion support

C64 changes
Support for drive burst modification.

C128 changes
Improved the z80 cycle emulation.
C128 model can be selected.
Added internal function RAM and RAM+RTC support.

VIC20 changes
Added I/O conflict checking with selectable behaviour.
Added masC=uerade adapter support, I/O-only C64 carts can now also be used with the VIC20 emulation.
The VIC border mode can be selected now (none, normal, full, debug).
Added DS12C887 RTC expansion support.

PLUS4 changes
The TED border mode can be selected now (none, normal, full, debug).
PLUS4 model can be selected.

PET changes
Added proper SuperPET support, including 6809(/6309) CPU emulation,
6702 (dongle) emulation, and the TPUG MMU board (for Super-OS/9).

CBM2 changes
CBM2 model can be selected.

Cartconv changes
Display usage when -f/-t/-i/-o/-n/-l is given without an extra parameter.

Petcat changes
Added Supergrafik support.

Unix changes
New Russian, Spanish and Korean translations of the UI elements and command-line options.
Added copy/paste support to the XAW GUI.
Added 'drag and drop' support to the GTK+ GUI.
Added monitor window support using VTE to the GTK+ GUI.

MS-Windows changes
Alot of GUI fixes and improvements.
Russian, Spanish and Korean translations of the UI elements and command-line options.
Hotkeys are now configurable by editing the win_hotkeys.vhk files.
Source can now be compiled without DX.

AmigaOS changes
New Russian, Spanish and Korean translations of the UI elements and command-line options.
Alot of GUI fixes and improvements.
Improved the library loading system, when 'optional' libraries fail to load, the features needing the library will be disabled.
Added support for the catweasel.device driver.

DOS changes
Added PCI Catweasel support.
Added PCI HardSID support.
Mac OS X changes

SDL UI changes
Added OpenCBM support.

BeOS changes
Alot of GUI fixes and improvements.
Joystick keysets have been fixed (again.)
"beos" sound driver can now be tested on Haiku (at your own risk) with command-line option: -sounddev beos

OS/2 changes
Alot of GUI fixes and improvements.

D/load WinVICE v2.4.0a (32bit)

[Nemo]

* Changes in VICE 2.4
======================

** General
----------

- New SDL based MIPS Windows NT port.

- New SDL based native Dingoo port.

- New monitor commands: autostart and autoload.

- Rewrite of the sound system, output is now mono/stereo selectable.

- Split off the 5x0 model from the 6x0/7x0 models in xcbm2, new emulator is
called xcbm5x0.

- Split off sid player from c64, new program is called vsid.

- New maintainer for the polish translations, they are now 100% up2date.

- New IEC FD2000/4000 drive support.

- New 1541 drive sounds emulation.

- 1541 drive emulation has been greatly improved.

** C64/C128 changes
-------------------

- ACIA address now selectable.

- I/O conflict behaviour now selectable.

- Added Pagefox cartridge support.

- Added Silverrock cartridge support.

- Added Formel64 cartridge support.

- IDE64 support extended to be able to handle 4 devices.

- IDE64 FD/CD/CF support added.

- Added "Kingsoft" ("Business Basic" aka "S'more") cartridge support.

- SFX sound sampler, SFX sound expander and digimax extended to output in
stereo.

- Added Triple SID support.

- Added Nordic Replay support to the Retro Replay cartridge emulation.

- Added video to audio leak sound support.

- Added VICII 'no border' mode support.

- Magic Voice cartridge emulation improvements.

- Added support for the kingsoft and starbyte userport joystick adapters.

- Added MicroMys, SmartMouse, Atari CX-22 trackball, and Atari mouse
support.

- Added supercard+ support.

- Added DS12C887 RTC expansion support.

- Added userport RTC (58321a) expansion support.

** C64 changes
--------------

- Support for drive burst modification.

** C128 changes
---------------

- Improved the z80 cycle emulation.

- C128 model can be selected.

- Added internal function RAM and RAM+RTC support.

** VIC20 changes
----------------

- Added I/O conflict checking with selectable behaviour.

- Added masC=uerade adapter support, I/O-only C64 carts can now also be used
with the VIC20 emulation.

- The VIC border mode can be selected now (none, normal, full, debug).

- Added DS12C887 RTC expansion support.

** PLUS4 changes
----------------

- The TED border mode can be selected now (none, normal, full, debug).

- PLUS4 model can be selected.

** PET changes
--------------

- Added proper SuperPET support, including 6809(/6309) CPU emulation,
6702 (dongle) emulation, and the TPUG MMU board (for Super-OS/9).

** CBM2 changes
---------------

- CBM2 model can be selected.

** Cartconv changes
-------------------

- Display usage when -f/-t/-i/-o/-n/-l is given without an extra parameter.

** Petcat changes
-----------------

- Added Supergrafik support.

** Unix changes
---------------

- New Russian, Spanish and Korean translations of the UI elements and
command-line options.

- Added copy/paste support to the XAW GUI.

- Added 'drag and drop' support to the GTK+ GUI.

- Added monitor window support using VTE to the GTK+ GUI.

** MS-Windows changes
---------------------

- Alot of GUI fixes and improvements.

- New Russian, Spanish and Korean translations of the UI elements and
command-line options.

- Hotkeys are now configurable by editing the win_hotkeys.vhk files.

- Source can now be compiled without DX.

** AmigaOS changes
------------------

- New Russian, Spanish and Korean translations of the UI elements and
command-line options.

- Alot of GUI fixes and improvements.

- Improved the library loading system, when 'optional' libraries fail to load,
the features needing the library will be disabled.

- Added support for the catweasel.device driver.

** DOS changes
--------------

- Added PCI Catweasel support.

- Added PCI HardSID support.

** Mac OS X changes
-------------------

** SDL UI changes
-----------------

- Added OpenCBM support.

** BeOS changes
---------------

- Alot of GUI fixes and improvements.

- Joystick keysets have been fixed (again.)

- "beos" sound driver can now be tested on Haiku (at your own risk) with
command-line option: -sounddev beos

** OS/2 changes
---------------

- Alot of GUI fixes and improvements.

Download page Vice 2.4για πλειαδα συστηματων και λειτουργικων μεχρι και για .... DOS !!!!!!!!

[Nemo]

Vice : o Commodore πολυεξομοιωτης (απο pet μεχρι DTV) και με υποστηριξη για το SuperCPU (65c816 στα 20Mhz μεσω του expansion port ενω συγχρονως δεχονταν μεχρι 16MB ram μνημη ) .

D/load http://www.filedropper.com/winvice-24-x86scpu64

θα μου πειτε ενταξει καλη η υποστηριξη για το SuperCPU ,αλλα και τωρα τι ????
http://supercpu.cbm8bit.com/games.htm#devel
http://csdb.dk/search/advancedresult.ph ... e%5B%5D=28